HOME    CONTACT US   
 POLICE NEWS
 CHAPLAIN'S CORNER
 OFFICER DOWN MEMORIAL PAGE
 IACP/DUPONT KEVLAR SURVIVORS CLUB
 EMPLOYMENT
 POLICE SUPPORT GROUPS
 POLICE PAY
 LETTERS
 TRAINING CALENDAR
 CAMPUS POLICE & SECURITY
 MEMBER INSIGNIAS
 SUBSCRIBE
 UNSUBSCRIBE
 CONTACT US
 
Printer Friendly Format Printer Friendly Format     Send to a Friend Send to a Friend
Websites for senior citizens

   
 
Recent Articles:
  Google's Going Trendy
  Illegal downloading
  XP Antivirus 2008 a Fraud
  Waking Up Vista
  Should I ever defragment flash drives?

Search Archives:

Computers 101

Q:
Are there any Web sites out there today that are aimed directly toward senior citizens? I sometimes get bored with some of the other sites I use and I would like to try something new.

A:
That's a very interesting question and while it's not something we've really touched on before, I think it's worth going over. I know a lot of WorldStart's readers spend a lot of time on their computers and it's always good to have new and exciting Web sites to look at throughout the day. Whether it's while you work or in your leisure time, there are several Web sites designed just for senior citizens.

Okay, before I list some sites for you, I want you to know that these are all good for networking with other seniors, making new friends, learning more about computers, obtaining information about retirement, etc. If that sounds interesting to you, come along with me as we visit some of them!

1.) Senior Citizens Resources - This Web site is run by FirstGov and it provides several tips for senior citizens. It gives information on consumer protection, places senior citizens can volunteer, seniors and adult education, advice on estate planning and federal and state agencies for seniors. This site also has links to the government sites that may be beneficial to senior citizens, such as the Administration on Aging, the Social Security Administration and the Veteran's Health Administration. Check it all out here.

2.) SeniorNet - This Web site's mission is to provide access to computer technology for older adults. As a result, senior citizens will be able to gain more knowledge and wisdom and eventually share it with others. This site is basically set up as a discussion board. Everyone is welcome to participate in the SeniorNet RoundTable discussion groups. You just have to sign up for the boards and then you will be able to learn and teach others about computers and using the Internet. If you feel like you could share your wisdom with others or if you want to learn more, this site is perfect for you! Check out SeniorNet right here.

3.) Web Pointers for Seniors - If you're looking for even more sites to try out, this is the place you'll want to go. It is managed by a retired couple from Oregon and they have set up a whole Web site full of links they feel would be of special interest to senior citizens. There are links to such topics as senior issues, grandkids, senior guides, caregiving, health, nutrition, legal issues, financial planning, travel and others. Do keep in mind that this site hasn't been updated in awhile and some of the links no longer work, but it's still worth taking a look at. There are still working links to a lot of helpful information that's useful for seniors. Check it out here.

4.) SeniorLink - This site is mainly helpful for senior citizens in maintaining independence in their own homes. The developers of this site want seniors to be able to do this safely and with dignity. This site even offers some help for children who have aging parents. It gives advice on making the difficult choices that come with the elderly care of their parents. This site does have some parts that require a paid subscription, but you can access free information in the Caregiver FAQ and Top Elder Risks sections. Take a look at it here.

5.) Write a Senior Citizen - Here is one more site I thought some of you might be interested in. This is more on the fun side of things! This Web site was actually created by two teenagers who wanted to bring senior citizens together. You can use it to write other seniors by e-mail or even by snail mail as a pen pal. If you're wanting to get connected with other seniors, this is the best place for it. Check it out here.

Now, I know this isn't something we usually share at WorldStart, but I thought some of you might get a kick out of it. Start fresh with all of these new Web sites and bring new life to your Internet experience!

~ Erin

Have a question for the newsletter? Submit it at the link below:
http://www.worldstart.com/submitquestion.htm

MS Office

Fraction Frenzy

Do you use a lot of fractions in MS Word?

Do you love how it turns 1/2 into ½?

Have you ever noticed that it only does that neat little trick with the most common fractions? I'm also sure some of you have found access to a few additional choices via the Insert menu, Symbols choice, but I'd bet you're still frustrated that neither of those work for the other fractions that plague your day.

If that describes your current fractional state of mind, I have some information that just might help!

The first thing you should know is you can format any fraction to "look right" using subscript and superscript text formatting.

Also, with frequently used fractions, you can put Word's AutoCorrect feature to good use by having it do the fraction "switch" automatically.

Here's the scoop!

For the actual formatting, you'll need to format the numbers as either superscript or subscript. If you're thinking you don't use fractions very often and will simply change them manually each time, I suggest you either add the buttons for this formatting to a toolbar using the Customize dialogue window (if you have MS Word 2007, the buttons are already on the Home Ribbon) or memorize these two key combinations:

Superscript formatting can be applied with Ctrl + Shift + = (also listed as Ctrl + +).

Subscript formatting can be applied with Ctrl + =.

Now that the formalities are out of the way, here's the actual process to follow when formatting fractions in Word:

1.) Type your fraction using the forward slash between the numerator (top) and the denominator (bottom). For example, 12/15

2.) Highlight the numerator and apply superscript formatting.

3.) Highlight the denominator and apply subscript formatting.

Voila! The fraction is complete.

It goes from 12/15 to this:

And all with just a couple quick formatting changes!

Now, if you have some fractions you constantly use, you certainly don't want to keep formatting them over and over again.

That's where the AutoCorrect feature comes in handy. It may take you a few minutes to get them entered into the system, but once they're there, you'll get automatic replacements and your time investment will pay off big time!

  • Once you've formatted a fraction the way you want it, highlight the entire fraction.

  • In Word 2007, go to the Office Button, Word Options button, Proofing Options section and click on the AutoCorrect Options button.



  • Everyone else should go to the Tools menu, AutoCorrect choice.

  • At the bottom of the AutoCorrect tab, you should see the Replace as you type list.



  • Notice that on the right, in the "with" field, your formatted fraction is already entered. If it doesn't seem to be formatted correctly, double check that the Formatted text option is selected.

  • On the left, in the Replace field, enter the plain text for the fraction that should be replaced with your formatted text.

  • Click the Add button.

  • Click OK to close the window.

Now, I realize you're going to have to repeat this process for each fraction you want added to the list, but I do have one small time saver to offer.

When you return to your document, don't delete the fraction you just worked on. Instead, highlight the numerator and type in the next number. Repeat the process with the denominator. That will replace the numbers without removing the superscript and subscript formatting, which allows you to go right back to the AutoCorrect feature much faster.

There you have it. Beautiful fractions at your fingertips!

~ April

Tip of the Day

Troubleshoot CD Recording

I'm in the mood to talk about CD burning today, so let's get right to it! Once you're sure you have a CD burner on your computer and you have it all set up, you should be good to go, right? Well, there's one more thing that could go wrong and that's exactly what we're going to talk about today. Let's get started!

The main question for this article is, "What if I can't get my burner to do anything?" And by anything, I basically mean recording material from your burner to a CD or DVD. Yes, that definitely can be a problem, especially since you can't really do anything if that capability isn't working right. So, let's troubleshoot this problem and see what we can come up with. Note: This tip is only for Windows XP users.

1.) First, you need to make sure you have the recording feature enabled. If you have Windows XP, you really don't have to do much to get the burner to work, but without the recording feature, you can't do a whole lot. To check this, double click on the My Computer icon on your desktop. Find whichever drive handles your CDs (generally drive D: or F:), right click on it and choose Properties. Next, click on the Recording tab and make sure the "Enable CD recording on this drive" option is checked.

Note: If you don't have a Recording tab, that means XP is not recognizing your burner's recording capabilities. If that's the case, you may need to consult with your CD burner manual to find out how to configure everything correctly. Depending on your situation, you may even need to change some things in your Registry Editor. If you have serious problems with this, you may want to contact your computer/burner manufacturer for additional help.

On the other hand, if you do have the Recording tab, keep going with me! When you turn on the recording feature, it starts the built-in CD recording in Windows XP. Now, if you use a different burning utility (other than the one that came with XP), you can disable this and just use the other program like you normally do.

2.) Another thing you may want to do is lower your burning speed. You more than likely have the software set to the fastest possible speed, but you might want to try setting it back to something like 18X or maybe even 8X. If you do that, you may see better results from your drive.

3.) Check on your system and make sure you have at least Windows XP Service Pack 1. For everything to run smoothly during the burning process, that has to be in place.

4.) And last (and the most obvious) is to check and make sure you have a blank CD in your CD ROM drive. You have to have one in there for the burning to start. Otherwise, the files will have no place to go and you will end up with nothing.

Hopefully with these troubleshooting techniques, you'll have a better burning experience from now on!

~ Erin

Printer Friendly Format Printer Friendly Format    Send to a Friend Send to a Friend

© 2008 Family Badge. All rights reserved.

 

The Family Badge
A publication of:
Police News Publishing Co. LLC
P.O. Box 5879  Galveston, Texas 77554
1-888-788-8967
E-mail: 
Webmaster@FamilyBadge.Org